One of the most unorthodox and also hardest form of sculpting would be in glass because it is very dangerous and may result in a few wounds and cuts if one is not careful. Now although it is the most dangerous form of sculpting, it is also one of the most beautiful because a glass sculpture Alberta can look really elegant. So if one would want to try out this form of sculpting, then this guide will be able to help.
Now take note that this kind of activity is quite dangerous because one may get cut by some of shards that he is using. That is why he will be needing some equipment and some supplies that will be able to keep him from getting hurt. Some of the things that he will be needing would be some goggles, some gloves, a torch, a kiln, and a graphite paddle.
The first thing that one should do would be to put on the goggles, the gloves, and wear some long sleeves so that he will be fully protected. Although it is optional, one should probably wear an apron because he will be getting some hot shards on him. If one thinks that he is safe enough, then he may light up the torch already.
Now when the torch has already been lit, then the next step would be to take a little piece and hold it lightly. This is where the dangerous part begins because one has to now point the torch right at the small piece in order to make it melt a little bit. The goal of this is to make a small ball shape thing out of it.
The first thing to do with these balls would be to actually create a small base from these things. The base is one of the most important parts of the sculpture because it will be the thing that will hold the figure. The thing that will be used for the creation of the base would be none other than the graphite paddles.
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be using the graphite paddle to straighten all of the parts and make it look like a real sculpture.
Slowly reduce the flame by ninety degrees in every one hour. That way, the glass sculpture Alberta will not break but will slowly form and harden up. When the sculpture has already cooled down, then it is already steady and may now be considered complete.
Now take note that this kind of activity is quite dangerous because one may get cut by some of shards that he is using. That is why he will be needing some equipment and some supplies that will be able to keep him from getting hurt. Some of the things that he will be needing would be some goggles, some gloves, a torch, a kiln, and a graphite paddle.
The first thing that one should do would be to put on the goggles, the gloves, and wear some long sleeves so that he will be fully protected. Although it is optional, one should probably wear an apron because he will be getting some hot shards on him. If one thinks that he is safe enough, then he may light up the torch already.
Now when the torch has already been lit, then the next step would be to take a little piece and hold it lightly. This is where the dangerous part begins because one has to now point the torch right at the small piece in order to make it melt a little bit. The goal of this is to make a small ball shape thing out of it.
The first thing to do with these balls would be to actually create a small base from these things. The base is one of the most important parts of the sculpture because it will be the thing that will hold the figure. The thing that will be used for the creation of the base would be none other than the graphite paddles.
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be using the graphite paddle to straighten all of the parts and make it look like a real sculpture.
Slowly reduce the flame by ninety degrees in every one hour. That way, the glass sculpture Alberta will not break but will slowly form and harden up. When the sculpture has already cooled down, then it is already steady and may now be considered complete.
About the Author:
Our unique web page at www.claudegarneaustudio.ca contains valuable information about glass sculpture Alberta area. To receive further details, review the main website by clicking on the link http://www.claudegarneaustudio.ca today.
No comments:
Post a Comment