Steps For Furniture Refinishing Massachusetts

By Sandra Stewart


For one to have a well future in life, he or she is expected to save money for future use. Majority of people are used to setting aside part of their income as savings. However, what other people are not aware of is that savings can also be done via other means such as refinishing of old products instead of buying new ones. For furniture refinishing Massachusetts in Hudson, MA the following process can be used.

The first step involved is through removal of the old finish. The step is often tedious because of the work that one will have to do in order to complete the process. One can decide to use the sanding technique which involves using a sand paper to get rid of finish that has remained. Then removal of any paint or stains using a higher grit of sand paper. Another technique is through the use of chemical strippers where the chemical is applied to get rid any old finish.

At times furniture might have rough places. This will require the use of sand paper in order to make the place smooth and remove any finish that might have stuck on it. If one had to use a chemical to remove stains, then in this process, he or she will still have to use sand paper and grain to smoothen the whole surface of the furniture.

Depending on the grain that the furniture has, this next step is optional. Furniture with open grains will require application of grain fillers while those with tight grains will not. Application of filler will need a paint brush or piece of rag. In case of excess filler, one will use a scraper of plastic material to remove it. After the filler has dried, the piece of wood will be lightly sanded with the grain.

Use of sanding sealer will be the last step involved in staining of furniture. By use of a sand sealer, the whole complete wood will be stained uniformly. Afterwards, a dense coat will be applied all over the wood and in case of excess coating, a piece of cloth will be used to remove it.

It is however important to know that in the staining process one can use different range of products. Before choosing a product it is necessary for one to follow instructions provided by the manufacturer on each product. Some of the products that one can choose from include water based or oil based and the gel stain.

At the finish level, one will have to put into consideration the kind of finish to be used. One will have to know what he or she will be looking for, the durability of the finish, the level of skill that he or she possess and how the things acquired are supposed to be used. By choosing the right products for the work, the outcome will be great.

Having taken all this into account, one is guaranteed of a successful refinishing of product. This will aid in cutting down the cost of having to acquire a new piece of furniture instead. It is however advised that one has to be keen throughout the whole process for effective results.




About the Author:



No comments:

Post a Comment