Typically, the part of the car that faces more risk of damage is the wheel. The wheels of your vehicle are the ones that touch the ground hence they can hit so many potholes, stones or other things that may be on the road. Once they are damaged, they put the brim at a higher risk of damage as well. Therefore, aluminum rim repair Orlando should be done immediately after damage so that the brim will not start rusting and lose its strength over time. More so, the brim can lose its integrity making the wheel to stop working altogether.
It is thus advisable to do the remodeling of the wheels as soon as the damage happens so that the risk of damaging can be reduced. Some simple steps can be followed to refurbish the alloy wheels, and they should be monitored closely. The things that you will need are liquid soap, masking tape, sponge, old towel, aluminum polish. High-gloss clear lacquer, grind sandpaper and alloy paint that matches the color of a wheel.
Firstly, you will clean wheel using the liquid soap with warm water. After cleaning it, leave it for some time to dry. Using the towel, apply paint thinner on the damaged part of your wheel. The paint thinner is used to remove old wax and road grime. Make sure that you have done this steps as outlined so that you can get desired results.
To get rid of paint thinner that may be in excess, you will be needed to wash it off using water and soap. Make sure the wheels are dry before you mask the undamaged parts of the car brim using your masking tape. Sand the area that is damaged using the 400-grit sandpaper.
The moment you notice that grooves are being formed and the part you are sending has become rough, immediately stop sanding. Cover the scratched parts with bond putty and give it some few minutes to dry. Use sandpaper with a 600 grit to sand the bond putty until you feel that it has become smooth.
Then, cover the rest of your car wheel as well as tire using the masking tape to stop overspray when you are applying the paint and lacquer. Then, you will be required to apply thin layers of paint to cover the putty then leave it to get dry completely.
When the paint dries, smoothen the repaired area using 1200 grit sandpaper. The next thing is washing the areas that have been painted using soap and slightly warm water and leave it to dry. Then, spray clear lacquer on the already shaded area of the wheel and leave it to dry overnight before proceeding to the next step.
Once you are sure that the lacquer is dry remove the tape from the other parts of your car wheel, then wash the wheel. The next thing is to apply alloy polish using a cloth that is soft and dry. Polish the whole wheel so as it will blend with the other parts. It is essential that you take extra care to your fringe.
It is thus advisable to do the remodeling of the wheels as soon as the damage happens so that the risk of damaging can be reduced. Some simple steps can be followed to refurbish the alloy wheels, and they should be monitored closely. The things that you will need are liquid soap, masking tape, sponge, old towel, aluminum polish. High-gloss clear lacquer, grind sandpaper and alloy paint that matches the color of a wheel.
Firstly, you will clean wheel using the liquid soap with warm water. After cleaning it, leave it for some time to dry. Using the towel, apply paint thinner on the damaged part of your wheel. The paint thinner is used to remove old wax and road grime. Make sure that you have done this steps as outlined so that you can get desired results.
To get rid of paint thinner that may be in excess, you will be needed to wash it off using water and soap. Make sure the wheels are dry before you mask the undamaged parts of the car brim using your masking tape. Sand the area that is damaged using the 400-grit sandpaper.
The moment you notice that grooves are being formed and the part you are sending has become rough, immediately stop sanding. Cover the scratched parts with bond putty and give it some few minutes to dry. Use sandpaper with a 600 grit to sand the bond putty until you feel that it has become smooth.
Then, cover the rest of your car wheel as well as tire using the masking tape to stop overspray when you are applying the paint and lacquer. Then, you will be required to apply thin layers of paint to cover the putty then leave it to get dry completely.
When the paint dries, smoothen the repaired area using 1200 grit sandpaper. The next thing is washing the areas that have been painted using soap and slightly warm water and leave it to dry. Then, spray clear lacquer on the already shaded area of the wheel and leave it to dry overnight before proceeding to the next step.
Once you are sure that the lacquer is dry remove the tape from the other parts of your car wheel, then wash the wheel. The next thing is to apply alloy polish using a cloth that is soft and dry. Polish the whole wheel so as it will blend with the other parts. It is essential that you take extra care to your fringe.
About the Author:
You can find details about the advantages you get when you use professional aluminum rim repair Orlando services at http://www.protechalloywheelsrepair.com today.
No comments:
Post a Comment